|
1) by means of the screw-driver take away the support lever against the stop on both back wheels |
| |
|
2) the rope of a parking brake is tense too strongly if the lever of one of supports departs from an emphasis (it is specified by an arrow) |
|
|
3) weaken an adjusting nut of a rope of a parking brake (it is specified by an arrow) so that both levers fell by an emphasis |
|
4) insert the screw-driver with a diameter at least 6 mm between a back hook of a spring and the bearing |
| 5) press a pedal of a brake about 40 times (the engine is killed) |
| 6) check that both wheels rotated freely |
| 7) remove the screw-driver |