Audi 80/90/Coupe
+ 1.2. Identification of the car
+ 2. Engines, carburetors
3. Lubrication system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Exhaust system
+ 7. System of ignition
+ 8. Transmission
+ 9. Suspension brackets, wheels
+ 10. Brake system
+ 11. Steering
- 12. Body, salon
12.2. Central section of a guard
12.3. Cowl rope
12.4. Forward guard
12.5. Forward wing
12.6. Lock pins of a cowl, rubber shock-absorber
12.7. Cowl
12.8. Gas-filled rack (Sedan models)
12.9. Trunk lid
12:10. Back door (Coupet's model)
12:11. Forward door, lower door loop
12:12. Adjustment of a window and the bearing door element
12:13. The window condensing traffic jams, the window regulator
12:14. Door lock
12:15. Draft of lever transfer of the lock
12:16. Rope of the internal door lock
12:17. Rotary clamp, adjusting spring
12:18. Adjustment of doors
12:19. The bearing door element
12:20. Central lock
12:21. The pump with two modes of forcing
12:22. Leading activator
12:23. Activator of a back door
12:24. Trunk lid activator
12:25. Activator of a cover of the fuel tank
12:26. Door glass (Coupet's model)
12:27. Adjustment of a butt slip (Coupet's model)
12:28. Framework of a back door, lower loop of a door
12:29. The bearing element of a back door, the condensing stopper
12:30. Rope, hinged lever
12:31. Door handle
12:32. Holder of components of a door
12:33. Hatch
12:34. Bumper casing
12:35. Sealing of a rear bumper
12:36. The extending clamp
12:37. Forward spoiler / laying of a niche of a wheel (Coupet's model)
12:38. Top overlay of a forward spoiler (Coupet's model)
12:39. Back spoiler / laying of a niche of a wheel
12:40. Rear bumper (Coupet's model)
12:41. Window regulators
12:42. Internal finishing of a body
12:43. Sitting
+ 13. Air conditioning system
+ 14. Electric equipment
|
Removal
| PERFORMANCE ORDER |
| 1) open a luggage carrier |
| 2) delay the decorative finishing located around a jellied mouth of the fuel tank back |
|
3) unscrew screws with a six-sided head, disconnect a pressure head / vacuum hose from the activator; remove the activator back
|
|
Installation
Carry out installation upside-down, in view of the following:
the moment of an inhaling of bolts with a six-sided head – 4.0 N. of m.
Removal (Coupet's model)
| PERFORMANCE ORDER |
| 1) open the hatch of the luggage compartment, pull out the shelf |
|
2) unscrew a screw (shooter), remove the right back buffer |
| 3) delay the decorative cover located around a bulk opening of the fuel tank back |
|
4) unscrew bolts (shooters), pull out the tank for flushing liquid of windscreen washer towards a back part |
| 5) unscrew fixing bolts of the activator, pull out the activator |
| 6) disconnect a pressure head / vacuum hose |
|
Installation
Carry out installation upside-down, in view of the following:
|
|
tighten fixing bolts of the activator of a cover of the fuel tank with m 4.0 N.' moment. check whether the central lock correctly functions
|
|
|