Audi 80/90/Coupe
+ 1.2. Identification of the car
+ 2. Engines, carburetors
3. Lubrication system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Exhaust system
+ 7. System of ignition
+ 8. Transmission
+ 9. Suspension brackets, wheels
+ 10. Brake system
+ 11. Steering
- 12. Body, salon
12.2. Central section of a guard
12.3. Cowl rope
12.4. Forward guard
12.5. Forward wing
12.6. Lock pins of a cowl, rubber shock-absorber
12.7. Cowl
12.8. Gas-filled rack (Sedan models)
12.9. Trunk lid
12:10. Back door (Coupet's model)
12:11. Forward door, lower door loop
12:12. Adjustment of a window and the bearing door element
12:13. The window condensing traffic jams, the window regulator
12:14. Door lock
12:15. Draft of lever transfer of the lock
12:16. Rope of the internal door lock
12:17. Rotary clamp, adjusting spring
12:18. Adjustment of doors
12:19. The bearing door element
12:20. Central lock
12:21. The pump with two modes of forcing
12:22. Leading activator
12:23. Activator of a back door
12:24. Trunk lid activator
12:25. Activator of a cover of the fuel tank
12:26. Door glass (Coupet's model)
12:27. Adjustment of a butt slip (Coupet's model)
12:28. Framework of a back door, lower loop of a door
12:29. The bearing element of a back door, the condensing stopper
12:30. Rope, hinged lever
12:31. Door handle
12:32. Holder of components of a door
12:33. Hatch
12:34. Bumper casing
12:35. Sealing of a rear bumper
12:36. The extending clamp
12:37. Forward spoiler / laying of a niche of a wheel (Coupet's model)
12:38. Top overlay of a forward spoiler (Coupet's model)
12:39. Back spoiler / laying of a niche of a wheel
12:40. Rear bumper (Coupet's model)
12:41. Window regulators
12:42. Internal finishing of a body
12:43. Sitting
+ 13. Air conditioning system
+ 14. Electric equipment
|
Cowl rope for models with bodies the Sedan
1. The fixing brackets, are established on a wing ledge
2. A clamp, for installation turn on 90 °
3. The directing plug
4. The holder of a rope, access to it is provided through an opening for access
bend конекц a cowl lock rope behind the holder of a rope |
5. The directing plug
6. The driving mechanism of the locking device
7. The fixing clip |
Cowl rope, detachment
| PERFORMANCE ORDER |
| 1) through an opening for access remove the holder of a rope |
|
2) extend a cowl rope (insert) |
|
Cowl rope, detachment for Coupet's model
| PERFORMANCE ORDER |
|
1) through an opening for access disconnect the holder of a rope 1 |
| 2) disconnect a rope from an arm 2 |
| 3) turn an arm 2 exactly on 90oi disconnect it from a guard |
|
Cowl rope, detachment for the Sedan model
| PERFORMANCE ORDER |
|
|
1) through an opening for access remove the holder of a rope and disconnect a rope |
| 2) unscrew screws of a casing of stitched air (arrow) |
| 3) through an opening for access disconnect the holder of a rope 1 |
| 4) disconnect a rope from an arm 2 |
|
|
|